Radiant Floor Heating Accessories
InstAlarm® radiant floor heating mat monitor
InstAlarm® is a radiant floor heating mat monitor that will sound an alarm during installation if the floor warming mat is damaged resulting in a short or open circuit.*
Connect InstAlarm® to your electric floor heat mats throughout the installation. Operates on a standard 9 Volt battery (included). Detailed operating instructions are provided. InstAlarm® is a "must have" for do-it-yourselfers and anyone who wants peace of mind during installation.
* InstAlarm® may not detect nicks in the heating wire that could cause GFCI tripping if the nick does not result in an open or short circuit.Digital Multimeter
Used to monitor electrical resistance of heating mats during installation - a heating mat warranty requirement.
- Three 1/2-digit adjustable display DMM
- 20-position rotary range switch
- Includes 9V battery and 2 1/2' test leads
- Full Manufacturer's Warranty
Plastic Trowel

3/8" x 3/8" notch. Ideal for use with our radiant floor heating mats.
Helps avoid nicking the wire.
Heavy duty. Won't rust. Easy to clean.
Ultra Light Kneepads
Extra thick, soft molded kneepads. Protect your knees and mats during installation.
Do not damage the wires like regular plastic kneepads.
Highly recommended.
ThermoStrips™ for tile floor heating ease of installation
ThermoStrips are self-adhesive, 24" x 2" x 5/16" synthetic cork strips to cover the room perimeter in order to significantly simplify the installation of radiant floor heating system, while using a self-leveling cement.
- 24" x 2" x 5/16" Synthetic cork strips
- Pressure sensitive adhesive
- Lightweight
- Provides "soft joint" perimeter
- Cuts with standard utility knife
- No waste
- Stackable to 15/16"
-
Synthetic cork material will not rot, support mold and mildew,
or absorb moisture
Cerazorb® tile underlayment and insulation system
CeraZorb is a great synthetic cork underlayment and insulation system, specifically designed for tile and stone floors.
- Ideal for installation below electric radiant floor heat
- Insulates cold subfloors and saves energy
- Up to 25 times lighter than 1/4" backerboard
- Excellent acoustical and crack suppression
- Lightweight, only 0.07 lbs. per SF
-
Synthetic cork material will not rot, support mold and mildew,
or absorb moisture - VOC free and environmentally friendly
ThermoGun™ Glue Gun
ThermoGun Glue Gun is a high quality hot glue device, which can be used to attach ThermoTile floor heating mats to the subfloor.
- Simplifies attaching ThermoTile floor heating mats to the subfloor
- Prevents mats and cable loops from lifting when using self-leveling cement
- Silicone protected nozzle prevents burns
- Heavy duty construction
- 40 Watt fast pre-heat
- 110/120-Volt
- UL Listed
- Includes two (2) 4.0" x 7/16" glue sticks





