ThermoSoft - TS38-0248 Accessory Detail

Self-adhesive synthetic cork strips to be placed around the floor perimeter as a barrier for self-leveling cement.

24" x 2" Synthetic cork strips
Pressure sensitive adhesive
Lightweight
Provides "soft joint" perimeter
Cuts with standard utility knife
No waste
Synthetic cork material will not rot, support mold and mildew, or absorb moisture

How to use ThermoStrips when installing radiant floor heating mats using self-leveling cement:

Peel and stick the strips around the perimeter of the floor area to be leveled.
Install strips over any floor ducts - they will be easily cut out after the self-leveling cement is dry.
Strips used at the door thresholds will contain the self-leveling cement.
Install radiant floor heating system within the floor area to be heated and leveled.
Brush primer for the self-leveling cement over heating mat and onto the subfloor.
Mix the self-leveling cement as per manufacturer's instructions.
Pour the self-leveling cement up to the ThermoStrips allowing it to flow.
The self-leveling cement will flow to, and stop at the strips. The result will be a flush transition between the ThermoStrips and the self-leveling cement.
Leave in ThermoStrips and install finished floor after the self-leveling cement has completely dried.