NeverFreeze® Pipe Tracing Cable

For weather-proofing indoor and outdoor water pipes, NeverFreeze pipe tracing cable is the best defense against seasonal damage. Safeguard your home against costly repairs due burst pipes by easily installing NeverFreeze self-regulating cable. Plug-in solution with GFCI and factory-direct custom sizes are available.
Electric radiant heating pipe cable complete with accessories
Electric Radiant Heating Pipe Cable available in custom lengths
Electric Radiant Heating Pipe Cable keep pipes flowing and ice free
Electric Radiant Heating Pipe Cable keep copper pipes flowing and ice free
Electric Radiant Heating Pipe Cable keep pipes flowing and ice free
Electric Radiant Heating Pipe Cable keep pipes flowing and ice free shown with loops
Electric radiant heating pipe cable complete with accessories
Electric Radiant Heating Pipe Cable available in custom lengths
Electric Radiant Heating Pipe Cable keep pipes flowing and ice free
Electric Radiant Heating Pipe Cable keep copper pipes flowing and ice free
Electric Radiant Heating Pipe Cable keep pipes flowing and ice free
Electric Radiant Heating Pipe Cable keep pipes flowing and ice free shown with loops
  • Designed for indoor and outdoor piping
  • Safe for straight, wrap-around, and overlap applications
  • Engineered for both residential and commercial applications
  • Single cold lead wire for easy hookup
  • Self-regulating temperature reduces power output

Drops in temperature can cause damage to your pipes if not properly cared for. Burst water pipes can cause flooding, leaks, and lead to dangerous mold and mildew later . Often, it is too late for prevention once an issue occurs and the damage is done long before anyone realizes. All the strife can be avoided easily and safely with NeverFreeze pipe tracing heating cable. Prevent costly damage and exhaustive repairs by easily installing the flexible cable ahead of time. Unlike other pipe tracing cables, NeverFreeze has unlimited installation methods, is ultra-flexible, and can be crossed along the spigot valve. Self-regulating heating elements reduce power output and consumption to the lowest possible point as the ambient conditions get warmer. Systems using self-regulating elements may not completely turn off without the use of an outside control.

Installation Guide

Power Connection Kit

GFCI Kit

End Seal Kit

Spec Sheet

Maintenance Check Sheet

Do I need a special controller?
No, all you must do is plug the attached GFCI Plug into an electrical outlet. You can also connect the system to an appropriate thermostat or controller.
Does the system turn off when not required?
No. NeverFreeze® self-regulating cable adjusts to the ambient temperature around it. By adapting to the environment, it uses no unnecessary power and it is extremely energy efficient. It can idle its output to a minimum temperature but does not completely shut off on its own. To do so, you must unplug the system or install it with an appropriate controller.
Is a 120-volt system more energy efficient than a 240-volt system?
NO. The voltage does not indicate energy efficiency, watts do.
Is NeverFreeze safe on plastic pipes?
YES! NeverFreeze self-regulating cable is approved for safe use on plastic and metal pipes.
Does NeverFreeze pipe tracing cable require insulation?
NO! It is not required, but it is recommended for use with NeverFreeze heating cables. By adding insulation, the cables are less susceptible to damage and heat loss is greatly reduced.
Can NeverFreeze self-regulating heat cable go inside a wall?
NO! Electric code does not allow pipe tracing cables inside or behind walls. The system should be easily accessible for maintenance, service, and testing.
Can I install NeverFreeze pipe tracing cable myself?
YES! Although NeverFreeze self-regulating cable is extremely easy to install, NEC requires a licensed electrician to make any non plug-in electrical connections.
How much power does the NeverFreeze heating cable use?
The amount of energy the cable uses will depend on the location it is installed in, the length and the ambient temperature. The heat output adjusts according to ambient temperatures, which dictates energy consumption. The length of pipes will determine power usage. Monitoring and modifying can be done using a thermostat, timer or power meter.
Can I cut the NeverFreeze heating cable if it’s too long?
YES! You can cut the self-regulating cable to the desired length. A licensed electrician should make any terminations.
How much cable do I need?
The amount of cable you will need depends on a few different factors. Call us at 8779229869 for help or to request a quote.
How do NeverFreeze pipe tracing cables work?
NeverFreeze pipe tracing cables are self-regulating, adjusting heat output based on ambient temperature. This drastically reduces power consumption and energy costs. Through its conductive polymer core, NeverFreeze cable prevents overheating and burning, even when overlapped and over insulted.
What is the power output of NeverFreeze?
5-8 watts/linear foot @ 0 degrees F. The output varies due to the cable being self-regulating. It will adjust its power continuously as the ambient temperature changes.
Can the cable be left out all year long?
The cable can be left on the house. However, it should not be operated above 50°F (10°C).
1 Cable
2 Snow Melt Controllers & Sensors
3 Electrical Accessories
Choose Rated Voltage:
Show 1 – 5 out of 5
Filter and sort
Clear all
Note: If you require multiple quantities of the same Cable Power product, please add each individually to your cart by returning to this page as needed.
    Cable Power Price per Ft. Length(ft.)
    5W/Ft
    		$7.00
    Ft.
    5W/Ft
    		$7.00
    Ft.
    8W/Ft
    		$7.00
    Ft.
    8W/Ft
    		$7.00
    Ft.
    12W/Ft
    		$7.00
    Ft.

    Call 800.308.8057

    Speak to a ThermoSoft radiant heat expert. For help choosing or project planning, call us or schedule a call.

    Schedule Call
Cable
2 Snow Melt Controllers & Sensors
3 Electrical Accessories
Snow Melt Controllers & Sensors
Choose Setting

Basic

Standard

Premium

  • Single-zone snow melt controller with remote sensor for ice and snow melting systems
    1 Zone Roof/Ground Controller with Remote sensor for Electric Driveway Snow and Ice Melt Systems
    ASE-DS-8C
    $472.50 View
  • Two-zone snow melt controller with remote sensor for driveway heating control
    2 Zone Roof/Ground Controller with Remote sensor for Electric Driveway Snow and Ice Melt Systems
    ASE-DS-9C
    $502.50 View
  • Snow melt system remote status control panel for driveway and walkway monitoring
    Wall-mounted Remote Control/Status Panel for Electric Radiant Snow and Ice Melt Systems
    ASE-CDP-2
    $156.25 View
  • Single circuit ground fault protection unit for snow melt heating systems
    GFPE protection for one 120/208/240VAC circuit up to 60A for Electric Driveway Snow and Ice Melt Systems
    ASE-GF-1
    $351.25 View
  • Dual circuit GFPE unit for protecting snow melt driveway systems
    GFPE protection for two 120/208/240VAC circuits up to 60A for Electric Driveway Snow and Ice Melt Systems
    ASE-GF-2
    $490.00 View
  • Advanced snow melt controller for automatic driveway and walkway heating systems
    OJ Advanced Outdoor Heat Controller For Driveway and Walkway Snow and Ice Melting
    ETO2-4550-US28
    $749.00 View
  • Roof gutter moisture sensor for snow and ice melt cable control
    OJ Roof and Gutter Sensor For Snow and Ice Melting Cable Control
    ETOR-55-US224
    $262.99 View
  • OJ Outdoor Air Temperature Sensor For Driveway and Walkway Snow and Ice Melting
    OJ Outdoor Air Temperature Sensor For Driveway and Walkway Snow and Ice Melting
    ETF-744/99
    $73.99 View
  • Outdoor 30A power box with GFEP for driveway snow melt system control
    Outdoor Power Distribution Box with GFEP for Driveway Snow Melt Systems (1 x 2 Pole 30A)
    MT-PYROBOX-1X2P
    $1,270.00 View
  • Outdoor dual-zone power box for large driveway snow melt systems
    Outdoor Power Distribution Box with GFEP for Driveway Snow Melt Systems (2 x 3 Pole 50A)
    MT-PYROBOX-2X3P
    $4,500.00 View
  • Outdoor snow sensor controller with indoor interface for driveway snow and icel melt heating
    "All In One” Sensor & Controller for Driveway and Walkway Snow and Ice Melting Electric Radiant Heating
    MT-PYROSELF24-X
    $1,050.00 View

    • Choose Other Components:

  • Factory pre-assembled connection kit for snow melt cables
    Factory Pre-Assembly of Connections for Roof and Gutter Snow and Ice Melt Heating Cables Includes Parts and Labor
    NF-GPPCK-FC
    $100.00 View
  • Complete power connection kit for roof and gutter snow and Ice melt cables
    Complete Power Connection Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NF-PCK
    $24.95 View
  • Downspout hanger bracket for roof de-icing cables
    Downspout Hanger Bracket for Roof and Gutter Snow and Ice Melt Heating Cables
    NF-HB
    $12.95 View
  • Roof and gutter cable end seal kit for snow melt systems
    Roof and Gutter Cable End Seal Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NF-ESK
    $10.95 View
    • Cable
    Snow Melt Controllers & Sensors
    3 Electrical Accessories
    Electrical Accessories
  • Power connection kit for electric snow melt cable systems
    Power Connection Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NFC-C-PCK
    $149.95 View
  • Cable splice kit for roof and gutter snow melt systems
    Cable Splice Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NFC-C-SK
    $134.95 View
  • End seal kit for roof and gutter snow melt heating cables
    End Seal Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NFC-C-LE
    $159.95 View
  • Junction box connection kit for roof de-icing systems
    Junction Box Connection Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NFC-I-PCK
    $169.95 View
  • Inline splice kit for snow melt roof cable systems
    Inline Splice Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NFC-I-SK
    $54.95 View
  • End seal kit for snow melt cable installations
    End Seal Kit for Roof and Gutter Snow and Ice Melt Heating Cables
    NFC-I-ES
    $19.95 View
  • Tee splice kit for branching snow melt heating cables
    Black Low-Profile Tee Connection Kit. Industrial application.
    NFC-I-TKIT-1
    $28.00 View

    • This is the last step

    See your cart
    • Designed for indoor and outdoor piping
    • Safe for straight, wrap-around, and overlap applications
    • Engineered for both residential and commercial applications
    • Single cold lead wire for easy hookup
    • Self-regulating temperature reduces power output

    Drops in temperature can cause damage to your pipes if not properly cared for. Burst water pipes can cause flooding, leaks, and lead to dangerous mold and mildew later . Often, it is too late for prevention once an issue occurs and the damage is done long before anyone realizes. All the strife can be avoided easily and safely with NeverFreeze pipe tracing heating cable. Prevent costly damage and exhaustive repairs by easily installing the flexible cable ahead of time. Unlike other pipe tracing cables, NeverFreeze has unlimited installation methods, is ultra-flexible, and can be crossed along the spigot valve. Self-regulating heating elements reduce power output and consumption to the lowest possible point as the ambient conditions get warmer. Systems using self-regulating elements may not completely turn off without the use of an outside control.

    Installation Guide

    Power Connection Kit

    GFCI Kit

    End Seal Kit

    Spec Sheet

    Maintenance Check Sheet

    Do I need a special controller?
    No, all you must do is plug the attached GFCI Plug into an electrical outlet. You can also connect the system to an appropriate thermostat or controller.
    Does the system turn off when not required?
    No. NeverFreeze® self-regulating cable adjusts to the ambient temperature around it. By adapting to the environment, it uses no unnecessary power and it is extremely energy efficient. It can idle its output to a minimum temperature but does not completely shut off on its own. To do so, you must unplug the system or install it with an appropriate controller.
    Is a 120-volt system more energy efficient than a 240-volt system?
    NO. The voltage does not indicate energy efficiency, watts do.
    Is NeverFreeze safe on plastic pipes?
    YES! NeverFreeze self-regulating cable is approved for safe use on plastic and metal pipes.
    Does NeverFreeze pipe tracing cable require insulation?
    NO! It is not required, but it is recommended for use with NeverFreeze heating cables. By adding insulation, the cables are less susceptible to damage and heat loss is greatly reduced.
    Can NeverFreeze self-regulating heat cable go inside a wall?
    NO! Electric code does not allow pipe tracing cables inside or behind walls. The system should be easily accessible for maintenance, service, and testing.
    Can I install NeverFreeze pipe tracing cable myself?
    YES! Although NeverFreeze self-regulating cable is extremely easy to install, NEC requires a licensed electrician to make any non plug-in electrical connections.
    How much power does the NeverFreeze heating cable use?
    The amount of energy the cable uses will depend on the location it is installed in, the length and the ambient temperature. The heat output adjusts according to ambient temperatures, which dictates energy consumption. The length of pipes will determine power usage. Monitoring and modifying can be done using a thermostat, timer or power meter.
    Can I cut the NeverFreeze heating cable if it’s too long?
    YES! You can cut the self-regulating cable to the desired length. A licensed electrician should make any terminations.
    How much cable do I need?
    The amount of cable you will need depends on a few different factors. Call us at 8779229869 for help or to request a quote.
    How do NeverFreeze pipe tracing cables work?
    NeverFreeze pipe tracing cables are self-regulating, adjusting heat output based on ambient temperature. This drastically reduces power consumption and energy costs. Through its conductive polymer core, NeverFreeze cable prevents overheating and burning, even when overlapped and over insulted.
    What is the power output of NeverFreeze?
    5-8 watts/linear foot @ 0 degrees F. The output varies due to the cable being self-regulating. It will adjust its power continuously as the ambient temperature changes.
    Can the cable be left out all year long?
    The cable can be left on the house. However, it should not be operated above 50°F (10°C).