Controllers and Sensors
We put all of our accessories and other items that you might need for a successful installation in one place, right here, making it easy to find the extras that make your installation go smoothly and easily. If you think there is something you need but don't see it here, make sure to give us a call so we can help.
Making a bulk order? Call now so we can get you the best value and confirm that your order will arrive on schedule.
GFPE protection for one 120/208/240VAC circuit up to 60A$351.25 /View The ASE-GF-1 provides an easy to integrate for your GFPE requirements. Each GF unit affords GFPE protection for one(1) 120/208/240VAC circuit up to 60A. The unique design allows installation of your own standard, off-the-shelf overload breaker into the load center. Size the breaker and wiring for your system, anywhere from 15A to 60A. Then install the GF unit between your load center branch circuit and the sensor/controller and heat cable. Your overload breaker protects the wiring.
- Works Together With Your Inexpensive, Off-The-Shelf Overload Circuit Breaker
- Provides True 30mA Trip Point GFPE Protection
- Meets NEC Article 426.28 and 427.22 Requirements
- Meets CEC 62-300 Requirements
- Protects 120/208/240VAC Systems up to 60A (#14-#6 CU-Only Conductor Capacity) Not Compatible With 277VAC or L-N-L 240VAC
- NEMA 4X Enclosure for Indoor or Outdoor Installation
Indoor Mounted Controller and power distribution box with GFEP (2 x 3 Pole 50A)$4,700.00 /View Power management electrical box. 2 * 3 Poles 50A / 600V contactors With Ground Fault.
GFPE protection for two 120/208/240VAC circuits up to 60A$490.00 /View The ASE GF-2 provides an easy to integrate for your GFPE requirements. Each GF unit affords GFPE protection for two(2) 120/208/240VAC circuit up to 60A. The unique design allows installation of your own standard, off-the-shelf overload breaker into the load center. Size the breaker and wiring for your system, anywhere from 15A to 60A. Then install the GF unit between your load center branch circuit and the sensor/controller and heat cable. Your overload breaker protects the wiring.
- Works Together With Your Inexpensive, Off-The-Shelf Overload Circuit Breaker
- Provides True 30mA Trip Point GFPE Protection
- Meets NEC Article 426.28 and 427.22 Requirements
- Meets CEC 62-300 Requirements
- Protects 120/208/240VAC Systems up to 60A (#14-#6 CU-Only Conductor Capacity) Not Compatible With 277VAC or L-N-L 240VAC
- NEMA 4X Enclosure for Indoor or Outdoor Installation
Wall-mounted Remote Control/Status Panel$156.25 /View The ASE-CDP-2 brings control and monitoring of your snow melt system indoors. No need to hope that the system has successfully triggered.
- Convenient Indoor Monitoring and Control
- Self Powered, No AC Wiring or Batteries Required
- Fits Any Standard Single Gang Electrical Box
- Compatible with Leviton Decora®/Hubbell StyleLine™ Cover Plates
- You Choose The Cover Plate Color and Material
- Smart "Manual On" Operates for One Delay Off Cycle
OJ Outdoor Air Temperature Sensor$73.99 /View Make installation, service, or replacement easy.
- Pair with the OJ Advanced Outdoor Heat Controller for air temperature sensing.
- Perfect for: Use with ground snow-melt systems when only air temperature input is desired, or roof and gutter heat when paired with the gutter moisture sensor.
- Not recommended as only sensor for a ground snow-melt system.
2 Zone Outdoor Roof/Ground Controller with Remote sensor$502.50 /View 2 Zone Outdoor Controller w/Remote Sensor
2 Zone Outdoor Ground Controller with Built-In Sensor$445.00 /View 2 Zone Outdoor Controller w/Sensor
1 Zone Outdoor Roof/Ground Controller with Remote sensor$472.50 /View 1 Zone Outdoor Controller w/Remote Sensor
1 Zone Outdoor Ground Controller w/ Built In Sensor$415.00 /View 1 Zone Outdoor Controller w/Sensor
"All In One” Snow Sensor & Controller$1,000.00 /View PYROSELF-X + PYROSB + RT_PYRO + IRP_PYRO + XC10 in catron box
"All In One” Snow Sensor & Controller$1,050.00 /View Sensor and Control with interface to indoor panel.-