NeverFreeze® Self-Regulating Roof & Gutter Cable

Electric Radiant Heat for Roof and Gutter De-Icing
  • Designed for shingle or metal roofs, downspouts and gutters
  • Additional accessories included in convenient kits
  • Engineered for both residential and commercial applications
  • Single cold lead wire for easy hookup
  • Proven brand-name controls and outdoor-rated sensors

If it snows where you live, you know that it can cause costly damage to your home. The constant weight of heavy snow can put undue stress on your home and weaken your roof. If ice builds up in your gutters, ice dams can form, preventing the melting snow from draining properly. This winter, avoid the possibility of stagnant moisture getting trapped underneath shingles and inside gutters, causing costly damage and exhaustive repairs. NeverFreeze roof and gutter cable provides a radiant heat solution that safely and effectively melt snow and keep your gutters functioning properly. NeverFreeze offers solutions for pipe tracing, heating of shingles and metal roofs, and facilitating gutter and downspout flow.

Self-regulating heating elements will reduce their power output and energy consumption to the lowest possible point as the ambient conditions get warmer. Systems using self-regulating heating elements may not completely turn off without the use of an outside control.

Installation Manual

Roof Clip Install

Roof GFCI Install

Planner

Roof Power Kit Install

Roof Power Seal Install

Spec Sheet

Can the cable be left out all year long?
The cable can be left on the house. However, it should not be operated above 50°F (10°C).
How long will it take for the snow to melt?
Our cable starts heating once it is connected to electricity. If the system is turned on at the beginning of the snowfall, it will prevent accumulation and ice formation.
Do I need to install the cable over my entire roof?
You do not need to install the cable over your entire roof. In-depth instructions are available along with live tech support. Our experts can help you decide the best layout for your project.
Does it need a thermostat or controller?
There is no controller or thermostat. It simply plugs into your electricity. The cable is self-regulating so you will not need to adjust it manually at any time.
Are your systems safe?
Our systems are UL approved for the U.S. and Canada. ThermoSoft prides itself on providing the safest, most reliable heating solutions available with extensive warranties and lifetime support.
Can I cut the cable to length?
You can cut the cable to the correct length you need. Our experts can help you find out the proper lengths required for your project.
How much power does the system use?
The power output will depend on how much cable your project will require. For help determining your system’s power usage, call us at (800)308-8057.
How much does the system cost to operate?
Many factors will determine the cost to operate your snow melting system. Total watts, kilowatts, kilowatt rate, hours spent operating, and remaining lag time will each play a role. Each project will vary so it is wise to keep lag time in mind when the system remains on to avoid refreezing. Electrical rates differ depending on location and time of day. For a more personalized estimation, call a ThermoSoft agent at (800)308-8057.
What happens if the cable is damaged during the installation?
If the cable is damaged, please call us immediately at (800)308-8057 and we can assist you further.
May I overlap the heating cable?
No, overlapping heating cables is never advised and will cause severe damage to your system. Always make sure you meet the spacing requirements. Also, never test the system when it is coiled or overlapped on itself. This can cause overheating and damage to your system.
Can I use it if there is already snow or ice on my roof or gutter?
It is recommended only to install the cable during dry conditions. The system will work as snow and ice accumulates, so it is not advised to add the cable to existing dams and snow.
What is the voltage?
Our cables come in either 120 Volts or 240 Volts. The voltage you need depends on how much space you are covering. Our experts can help you choose which is right for you.
Why not just manually take the snow off the roof?
Manually removing snow can be dangerous and ineffective. Our systems are designed to melt the snow and ice as it develops, helping to avoid buildup. By treating the problem as it arises, a clear channel is continually open for water to escape. This helps prevent problems that could have already developed once snow and ice has accumulated and someone removes it manually. Also, our system automatically detects and adjusts its reactions accordingly and continuously once it’s turned on. You won’t have to keep running out during every snowfall or cold spell. Just lay the cable out and let it work for you.
1 Cable
2 Snow Melt Controllers & Sensors
3 Electrical Accessories
Choose Rated Voltage:
Show 1 – 5 out of 5
Filter and sort
Clear all
Note: If you require multiple quantities of the same Cable Power product, please add each individually to your cart by returning to this page as needed.
    Cable Power Price per Ft. Length(ft.)
    5W/Ft
    		$7.00
    Ft.
    5W/Ft
    		$7.00
    Ft.
    8W/Ft
    		$7.00
    Ft.
    8W/Ft
    		$7.00
    Ft.
    12W/Ft
    		$7.00
    Ft.

    Call 800.308.8057

    Speak to a ThermoSoft radiant heat expert. For help choosing or project planning, call us or schedule a call.

    Schedule Call

    • Choose Other Components:

  • Roof clips (25 pack)
    Roof clips (25 pack)
    NF-RC25
    $34.95 View
  • Roof clips (50 pack)
    Roof clips (50 pack)
    NF-RC50
    $50.95 View
  • Factory Connection for Roof and Gutter. Includes Parts and Labor
    Factory Connection for Roof and Gutter. Includes Parts and Labor
    NF-GPPCK-FC
    $100.00 View
Cable
2 Snow Melt Controllers & Sensors
3 Electrical Accessories
Snow Melt Controllers & Sensors
Choose Setting

Basic

Standard

Premium

  • 1 Zone Outdoor Roof/Ground Controller with Remote sensor
    1 Zone Outdoor Roof/Ground Controller with Remote sensor
    ASE-DS-8C
    $472.50 View
  • 2 Zone Outdoor Roof/Ground Controller with Remote sensor
    2 Zone Outdoor Roof/Ground Controller with Remote sensor
    ASE-DS-9C
    $502.50 View
  • Wall-mounted Remote Control/Status Panel
    Wall-mounted Remote Control/Status Panel
    ASE-CDP-2
    $156.25 View
  • GFPE protection for one 120/208/240VAC circuit up to 60A
    GFPE protection for one 120/208/240VAC circuit up to 60A
    ASE-GF-1
    $351.25 View
  • GFPE protection for two 120/208/240VAC circuits up to 60A
    GFPE protection for two 120/208/240VAC circuits up to 60A
    ASE-GF-2
    $490.00 View
  • OJ Advanced Outdoor Heat Controller
    OJ Advanced Outdoor Heat Controller
    ETO2-4550-US28
    $749.00 View
  • OJ Gutter Moisture Sensor
    OJ Gutter Moisture Sensor
    ETOR-55-US224
    $262.99 View
  • OJ Outdoor Air Temperature Sensor
    OJ Outdoor Air Temperature Sensor
    ETF-744/99
    $73.99 View
  • Outdoor approved power distribution box with GFEP (1 x 2 Pole 30A)
    Outdoor approved power distribution box with GFEP (1 x 2 Pole 30A)
    MT-PYROBOX-1X2P
    $1,270.00 View
  • Outdoor approved power distribution box with GFEP (2 x 3 Pole 50A)
    Outdoor approved power distribution box with GFEP (2 x 3 Pole 50A)
    MT-PYROBOX-2X3P
    $4,500.00 View
  • "All In One” Snow Sensor & Controller
    "All In One” Snow Sensor & Controller
    MT-PYROSELF24-X
    $1,050.00 View
  • "All In One” Snow Sensor & Bracket
    "All In One” Snow Sensor & Bracket
    MT-PYROSENSESB-K
    $858.00 View

    • Choose Other Components:

  • Hardwired Power Connection Kit
    Hardwired Power Connection Kit
    NF-PCK
    $24.95 View
  • Hanger Bracket
    Hanger Bracket
    NF-HB
    $12.95 View
  • End Seal Kit
    End Seal Kit
    NF-ESK
    $10.95 View
    • Cable
    Snow Melt Controllers & Sensors
    3 Electrical Accessories
    Electrical Accessories
  • Quick Connect Power Cord
    Quick Connect Power Cord
    NFC-C-PCK
    $149.95 View
  • Quick Connect Splice Kit
    Quick Connect Splice Kit
    NFC-C-SK
    $134.95 View
  • Quick Connect Lighted End
    Quick Connect Lighted End
    NFC-C-LE
    $159.95 View
  • Compact Junction Box
    Compact Junction Box
    NFC-I-PCK
    $169.95 View
  • Compact Splice Kit
    Compact Splice Kit
    NFC-I-SK
    $54.95 View
  • Compact End Seal Kit
    Compact End Seal Kit
    NFC-I-ES
    $19.95 View
  • Black Low-Profile Tee Connection Kit. Industrial application.
    Black Low-Profile Tee Connection Kit. Industrial application.
    NFC-I-TKIT-1
    $28.00 View

    • This is the last step

    See your cart
    • Designed for shingle or metal roofs, downspouts and gutters
    • Additional accessories included in convenient kits
    • Engineered for both residential and commercial applications
    • Single cold lead wire for easy hookup
    • Proven brand-name controls and outdoor-rated sensors

    If it snows where you live, you know that it can cause costly damage to your home. The constant weight of heavy snow can put undue stress on your home and weaken your roof. If ice builds up in your gutters, ice dams can form, preventing the melting snow from draining properly. This winter, avoid the possibility of stagnant moisture getting trapped underneath shingles and inside gutters, causing costly damage and exhaustive repairs. NeverFreeze roof and gutter cable provides a radiant heat solution that safely and effectively melt snow and keep your gutters functioning properly. NeverFreeze offers solutions for pipe tracing, heating of shingles and metal roofs, and facilitating gutter and downspout flow.

    Self-regulating heating elements will reduce their power output and energy consumption to the lowest possible point as the ambient conditions get warmer. Systems using self-regulating heating elements may not completely turn off without the use of an outside control.

    Installation Manual

    Roof Clip Install

    Roof GFCI Install

    Planner

    Roof Power Kit Install

    Roof Power Seal Install

    Spec Sheet

    Can the cable be left out all year long?
    The cable can be left on the house. However, it should not be operated above 50°F (10°C).
    How long will it take for the snow to melt?
    Our cable starts heating once it is connected to electricity. If the system is turned on at the beginning of the snowfall, it will prevent accumulation and ice formation.
    Do I need to install the cable over my entire roof?
    You do not need to install the cable over your entire roof. In-depth instructions are available along with live tech support. Our experts can help you decide the best layout for your project.
    Does it need a thermostat or controller?
    There is no controller or thermostat. It simply plugs into your electricity. The cable is self-regulating so you will not need to adjust it manually at any time.
    Are your systems safe?
    Our systems are UL approved for the U.S. and Canada. ThermoSoft prides itself on providing the safest, most reliable heating solutions available with extensive warranties and lifetime support.
    Can I cut the cable to length?
    You can cut the cable to the correct length you need. Our experts can help you find out the proper lengths required for your project.
    How much power does the system use?
    The power output will depend on how much cable your project will require. For help determining your system’s power usage, call us at (800)308-8057.
    How much does the system cost to operate?
    Many factors will determine the cost to operate your snow melting system. Total watts, kilowatts, kilowatt rate, hours spent operating, and remaining lag time will each play a role. Each project will vary so it is wise to keep lag time in mind when the system remains on to avoid refreezing. Electrical rates differ depending on location and time of day. For a more personalized estimation, call a ThermoSoft agent at (800)308-8057.
    What happens if the cable is damaged during the installation?
    If the cable is damaged, please call us immediately at (800)308-8057 and we can assist you further.
    May I overlap the heating cable?
    No, overlapping heating cables is never advised and will cause severe damage to your system. Always make sure you meet the spacing requirements. Also, never test the system when it is coiled or overlapped on itself. This can cause overheating and damage to your system.
    Can I use it if there is already snow or ice on my roof or gutter?
    It is recommended only to install the cable during dry conditions. The system will work as snow and ice accumulates, so it is not advised to add the cable to existing dams and snow.
    What is the voltage?
    Our cables come in either 120 Volts or 240 Volts. The voltage you need depends on how much space you are covering. Our experts can help you choose which is right for you.
    Why not just manually take the snow off the roof?
    Manually removing snow can be dangerous and ineffective. Our systems are designed to melt the snow and ice as it develops, helping to avoid buildup. By treating the problem as it arises, a clear channel is continually open for water to escape. This helps prevent problems that could have already developed once snow and ice has accumulated and someone removes it manually. Also, our system automatically detects and adjusts its reactions accordingly and continuously once it’s turned on. You won’t have to keep running out during every snowfall or cold spell. Just lay the cable out and let it work for you.