SAVE 50% ON HEATING MATS
CALL NOW FOR VOLUME & PHONE ONLY SPECIALS!
Sale ends June 25

NeverFreeze® Snow Melting Mats

NeverFreeze snow melting mats provides a radiant heat solution that functions as a permanent addition to your outdoor spaces, persisting through any weather conditions that nature may bring. It is an excellent option for high-traffic areas like walkways and steps that are commonly slippery and hazardous.
Electric Snow and Ice Melt Radiant Heat Mats and controller bundled kit system for driveways, walkways and steps
Electric NeverFreeze snow and ice melting mat for driveways, walkways, and steps
Variety of different sized NeverFreeze Snow and Ice Melting Electric Radiant Heating Mats for driveways and walkways
Electric NeverFreeze Snow and Ice Melt Radiant Heating Mat for Driveways and walkways
NeverFreeze Snow and Ice Melt Electric Radiant Heating Mats Installed in Driveway
Electric Snow and Ice Melt Radiant Heat Mats and controller bundled kit system for driveways, walkways and steps
Electric NeverFreeze snow and ice melting mat for driveways, walkways, and steps
Variety of different sized NeverFreeze Snow and Ice Melting Electric Radiant Heating Mats for driveways and walkways
Electric NeverFreeze Snow and Ice Melt Radiant Heating Mat for Driveways and walkways
NeverFreeze Snow and Ice Melt Electric Radiant Heating Mats Installed in Driveway
  • Engineered to install in concrete, asphalt, or under pavers
  • Customized widths for tire tracks
  • Designed for both residential and commercial applications
  • Single cold lead wire for easy hookup
  • Proven brand-name controls and outdoor-rated sensors

With a NeverFreeze snow melting system, you can watch the snow fall peacefully from inside your warm home without worrying about shoveling your driveway or deicing your walkways. NeverFreeze snow melting mats provides a radiant heat solution that functions as a permanent addition to your outdoor spaces, persisting through any weather conditions that nature may bring. It is an excellent option for high-traffic areas like walkways and steps that are commonly slippery and hazardous.

For larger applications see our PYROBOX line of controllers which supports increased loads and offers sequencing between multiple zones.

User Manual

Overview

Warranty

Spec Sheet

What are NeverFreeze® Electric snow and ice melting mats?
NeverFreeze® Electric snow and ice melting mats are electric radiant heating cables attached to a permeable mesh. These mats are installed beneath outdoor surfaces like pavers, concrete overlay or asphalt to help melt snow and ice. They are designed for application in driveways, walkways and stairs
Why choose NeverFreeze® Electric snow and ice melting mats instead of cable?
NeverFreeze® Electric snow and ice melting mats use a pre-spaced format that can help simplify layout planning and installation. Both electrically heated outdoor mats and cables serve the same snow and ice melting applications, but mats may be easier when the mat format fits the project.
Can NeverFreeze® Electric snow and ice melting mats be used for driveways and walkways?
Yes. NeverFreeze® Electric snow and ice melting mats can be used for driveways, walkways, steps, and other outdoor surfaces when installed according to the product requirements and local electrical code.
What surfaces can NeverFreeze® Electric snow and ice melting mats be installed in?
NeverFreeze® Electric snow and ice melting mats are engineered for concrete overlay, asphalt, and paver applications. The final installation approach should match the surface material and project requirements.
Will melted snow refreeze into ice?
The outdoor snow and ice melting controls include features that help prevent refreezing. They allow the system to continue operating for a period after snow has melted so the surface can remain clear.
How fast will NeverFreeze® Electric snow and ice melting mats melt snow?
On average, the NeverFreeze® Electric snow and ice melting mats can melt about 2 inches of snow per hour. Actual performance depends on snowfall rate, temperature, wind, controls, and installation conditions.
What is the lowest temperature the NeverFreeze® Electric snow and ice melting mats can handle?
Controls usually shut the system off at around 17°F, but that setting may be overridden when needed. Performance depends on the conditions and system design.
What conduit is needed for NeverFreeze® Electric snow and ice melting mat system?
Lead wires are typically pulled through outdoor rated conduit to a junction box rated for outdoor use. A qualified licensed electrician should follow the ThermoSoft installation manual and local code requirements.
Will I need an expanded electrical panel?
Many snow melting projects require added electrical capacity. The amount of power needed depends on the heated area and system design. Always consult a licensed electrician. You can also call ThermoSoft US experts for assistance.
How much power does NeverFreeze® Electric snow and ice melting mat system use?
Power depends on the heated area. For snow melting heating mats, use this planning formula: 45 W per sq. ft. x heated area in sq. ft. divided by voltage equals Amps. For help sizing a system, call ThermoSoft US experts at (800) 308-8057.
How much do NeverFreeze® Electric snow and ice melting mats cost to operate?
Operating costs depend on heating system size, local electricity rates, run time, snowfall, and lag time used to prevent refreezing. For a specific project estimate, call ThermoSoft US experts at (800) 308-8057.
How much does a NeverFreeze® Electric snow and ice melting mat system cost?
Project cost depends on coverage area, controls, surface type, electrical work, and installation requirements. Controls are sold separately. Contact ThermoSoft for help estimating your project.
What happens if the heating cable is damaged during installation?
Stop installation and contact ThermoSoft immediately for assistance. Do not continue installing a damaged heating cable.
Can heating cables overlap?
No. Heating cables must never overlap. Overlapping can severely damage the system and must be avoided by following the required spacing.
Can cold lead wires be cut?
A qualified licensed electrician may cut, extend, or splice cold lead wires in a junction box when allowed by the installation manual and local code. Contact ThermoSoft before making changes.
Can I cut the heating cable?
No. The heating cable must never be cut. Cutting the heating cable will destroy the system and void the ThermoSoft Warranty.
How does electric snow melting compare with hydronic snow melting?
Electric snow melting systems are often easier to install and can be more practical for many residential projects. Contact ThermoSoft for project guidance.
1 Heating Mats (240V)
2 Snow Melt Controllers & Sensors

Available in different power options depending on cable spacing. 4” cable spacing provides 50 W/ft² of heat output and manages up to 2 inches/hour of snowfall. 5” spacing provides 40 W/ft² of heat output managing up to 1 inch/hour of snowfall. Select multiple mats and/or different sizes to meet any requirement. Compatible with asphalt, concrete, and brick surfaces. All mats listed are 240V. Contact us for 208V, 277V, 480V, and 600V, project assistance or help finding a local dealer/installer.

Choose Cable spacing:
Choose Width:
Show 1 – 25 out of 101
Filter and sort
Clear all
Heating Mats (240V)
2 Snow Melt Controllers & Sensors
Snow Melt Controllers & Sensors

Customize temperature, moisture, and timing settings with a snow and ice melting controller. A ground or aerial sensor is required for a complete system. Some controllers are not rated for outdoor installation. Ground sensors are designed for flush installation with the outdoor heated surfaces. Contact an expert for guidance.

Choose Setting

Not Sure Which is Best? Contact Us for Help

Basic

Standard

Premium

  • 2 Zone Snow Melt Controller with Built-in Sensor for Driveway Heating Systems Dual-zone snow melt controller with integrated sensor for outdoor heating systems
    2 Zone Snow Melt Controller with Built-in Sensor for Driveway Heating Systems
    ASE-DS-5C
    $445.00 View
  • Single-zone snow melt controller with remote sensor for ice and snow melting systems
    1 Zone Roof/Ground Controller with Remote sensor for Electric Driveway Snow and Ice Melt Systems
    ASE-DS-8C
    $472.50 View
  • Two-zone snow melt controller with remote sensor for driveway heating control
    2 Zone Roof/Ground Controller with Remote sensor for Electric Driveway Snow and Ice Melt Systems
    ASE-DS-9C
    $502.50 View
  • ASE CDP-2 : Snow Sensor Control/Display Panel for use with the DS-2C, DS-5, DS-, and DS-224 snow and ice melting controllers Snow melt system remote status control panel for driveway and walkway monitoring
    Wall-mounted Remote Control/Status Panel for Electric Radiant Snow and Ice Melt Systems
    ASE-CDP-2
    $156.25 View
  • Single circuit ground fault protection unit for snow melt heating systems
    GFPE protection for one 120/208/240VAC circuit up to 60A for Electric Driveway Snow and Ice Melt Systems
    ASE-GF-1
    $351.25 View
  • Dual circuit GFPE unit for protecting snow melt driveway systems
    GFPE protection for two 120/208/240VAC circuits up to 60A for Electric Driveway Snow and Ice Melt Systems
    ASE-GF-2
    $490.00 View
  • Advanced snow melt controller for automatic driveway and walkway heating systems
    OJ Advanced Outdoor Heat Controller For Driveway and Walkway Snow and Ice Melting
    ETO2-4550-US28
    $749.00 View
  • UL-listed enclosure box for snow melt controller installation
    UL-mounting box for ETO2 For Driveway and Walkway Snow and Ice Melting
    ETO2-BOX
    $499.00 View
  • Embedded slab sensor for driveway snow melt system monitoring
    Ground Temp & moisture sensor for ET02 For Driveway and Walkway Snow and Ice Melting
    ETOG-56
    $424.99 View
  • Sensor mounting tube for embedded snow melt system installation
    OJ Ground Sensor Mounting Tube For Driveway and Walkway Snow and Ice Melting Cable Control
    ETOK-1
    $74.99 View
  • Indoor multi-circuit power control box for snow melt systems
    Indoor Mounted Controller and Power Distribution Box with GFEP for Driveway Snow Melt System Control (4 x 2 Pole 30A)
    MT-PYROBOX3/19
    $5,300.00 View
  • 3-phase high-capacity power box for commercial snow melt systems
    Indoor Mounted Controller and Power Distribution Box with GFEP for Driveway Snow Melt System Control (2 x 3 Pole 50A)
    MT-PYROBOX3C/19
    $4,700.00 View
  • Multi-contactor power box for large-scale snow melt installations
    Indoor Mounted Controller and Power Distribution Box with GFEP for Driveway Snow Melt System Control (4 x 3 Pole 50A)
    MT-PYROBOX5/19
    $6,800.00 View
  • Heated pavement sensor for automatic snow melt detection
    Ground/Pavement Snow and Ice Sensor for Electric Radiant Driveway and Walkways
    MT-PYRO-GROUND-SENSOR
    $1,027.00 View
  • Outdoor 30A power box with GFEP for driveway snow melt system control
    Outdoor Power Distribution Box with GFEP for Driveway Snow Melt Systems (1 x 2 Pole 30A)
    MT-PYROBOX-1X2P
    $1,270.00 View
  • Electric Snow and Ice Melt Radiant Heat Cable and controller bundled kit system for driveways, walkways and steps
    Outdoor Power Distribution Box with GFEP for Driveway Snow Melt Systems (2 x 3 Pole 50A)
    MT-PYROBOX-2X3P
    $4,500.00 View
  • Outdoor snow sensor controller with indoor interface for driveway snow and icel melt heating
    "All In One” Sensor & Controller for Driveway and Walkway Snow and Ice Melting Electric Radiant Heating
    MT-PYROSELF24-X
    $1,050.00 View
  • Snow sensor and mounting bracket kit for outdoor snow melt systems
    "All In One” Snow Sensor & Bracket
    MT-PYROSENSESB-K
    $858.00 View

    • This is the last step

    See your cart
    • Engineered to install in concrete, asphalt, or under pavers
    • Customized widths for tire tracks
    • Designed for both residential and commercial applications
    • Single cold lead wire for easy hookup
    • Proven brand-name controls and outdoor-rated sensors

    With a NeverFreeze snow melting system, you can watch the snow fall peacefully from inside your warm home without worrying about shoveling your driveway or deicing your walkways. NeverFreeze snow melting mats provides a radiant heat solution that functions as a permanent addition to your outdoor spaces, persisting through any weather conditions that nature may bring. It is an excellent option for high-traffic areas like walkways and steps that are commonly slippery and hazardous.

    For larger applications see our PYROBOX line of controllers which supports increased loads and offers sequencing between multiple zones.

    User Manual

    Overview

    Warranty

    Spec Sheet

    What are NeverFreeze® Electric snow and ice melting mats?
    NeverFreeze® Electric snow and ice melting mats are electric radiant heating cables attached to a permeable mesh. These mats are installed beneath outdoor surfaces like pavers, concrete overlay or asphalt to help melt snow and ice. They are designed for application in driveways, walkways and stairs
    Why choose NeverFreeze® Electric snow and ice melting mats instead of cable?
    NeverFreeze® Electric snow and ice melting mats use a pre-spaced format that can help simplify layout planning and installation. Both electrically heated outdoor mats and cables serve the same snow and ice melting applications, but mats may be easier when the mat format fits the project.
    Can NeverFreeze® Electric snow and ice melting mats be used for driveways and walkways?
    Yes. NeverFreeze® Electric snow and ice melting mats can be used for driveways, walkways, steps, and other outdoor surfaces when installed according to the product requirements and local electrical code.
    What surfaces can NeverFreeze® Electric snow and ice melting mats be installed in?
    NeverFreeze® Electric snow and ice melting mats are engineered for concrete overlay, asphalt, and paver applications. The final installation approach should match the surface material and project requirements.
    Will melted snow refreeze into ice?
    The outdoor snow and ice melting controls include features that help prevent refreezing. They allow the system to continue operating for a period after snow has melted so the surface can remain clear.
    How fast will NeverFreeze® Electric snow and ice melting mats melt snow?
    On average, the NeverFreeze® Electric snow and ice melting mats can melt about 2 inches of snow per hour. Actual performance depends on snowfall rate, temperature, wind, controls, and installation conditions.
    What is the lowest temperature the NeverFreeze® Electric snow and ice melting mats can handle?
    Controls usually shut the system off at around 17°F, but that setting may be overridden when needed. Performance depends on the conditions and system design.
    What conduit is needed for NeverFreeze® Electric snow and ice melting mat system?
    Lead wires are typically pulled through outdoor rated conduit to a junction box rated for outdoor use. A qualified licensed electrician should follow the ThermoSoft installation manual and local code requirements.
    Will I need an expanded electrical panel?
    Many snow melting projects require added electrical capacity. The amount of power needed depends on the heated area and system design. Always consult a licensed electrician. You can also call ThermoSoft US experts for assistance.
    How much power does NeverFreeze® Electric snow and ice melting mat system use?
    Power depends on the heated area. For snow melting heating mats, use this planning formula: 45 W per sq. ft. x heated area in sq. ft. divided by voltage equals Amps. For help sizing a system, call ThermoSoft US experts at (800) 308-8057.
    How much do NeverFreeze® Electric snow and ice melting mats cost to operate?
    Operating costs depend on heating system size, local electricity rates, run time, snowfall, and lag time used to prevent refreezing. For a specific project estimate, call ThermoSoft US experts at (800) 308-8057.
    How much does a NeverFreeze® Electric snow and ice melting mat system cost?
    Project cost depends on coverage area, controls, surface type, electrical work, and installation requirements. Controls are sold separately. Contact ThermoSoft for help estimating your project.
    What happens if the heating cable is damaged during installation?
    Stop installation and contact ThermoSoft immediately for assistance. Do not continue installing a damaged heating cable.
    Can heating cables overlap?
    No. Heating cables must never overlap. Overlapping can severely damage the system and must be avoided by following the required spacing.
    Can cold lead wires be cut?
    A qualified licensed electrician may cut, extend, or splice cold lead wires in a junction box when allowed by the installation manual and local code. Contact ThermoSoft before making changes.
    Can I cut the heating cable?
    No. The heating cable must never be cut. Cutting the heating cable will destroy the system and void the ThermoSoft Warranty.
    How does electric snow melting compare with hydronic snow melting?
    Electric snow melting systems are often easier to install and can be more practical for many residential projects. Contact ThermoSoft for project guidance.